Back

Smart Sockets

To control the smart sockets, a user have to follow the MQTT2GO convention. To ease up the setup, this page is dedicated to the command and report messages utilized for such communication.

Commands

As specified by the MQTT2GO convention, the commands are utilized for device control. In the following subsection, we present the standardized way which is following the convention.

Set On

{
	"timestamp": 1567677926,
	"value": "on"
}

Set Off

{
	"timestamp": 1567677926,
	"value": "off"
}

Set Timer

The set_timer command is utilized to setup the periodical action which will trigger at the time set via the time value. In this case, the device will turn on/off at the selected time.

{
	"timestamp": 1567677926,
	"value": {
		"unit": "hh:mm:ss",
		"time": "02:12:00",
		"action": "on/off"
	}
}

Reports

Reports are utilized either as responses to the commands or to report periodic or critical event.

State Report

Consumption Report

{
	"priority_level": 2,
	"timestamp": 1567677956,
	"report": {
		"value": 45,
		"unit": "Ws"
	}
}

Current Report

{
	"priority_level": 2,
	"timestamp": 1567677956,
	"report": {
		"value": 1.2,
		"unit": "A"
	}
}

Voltage Report

{
	"priority_level": 2,
	"timestamp": 1567677956,
	"report": {
		"value": 232.4,
		"unit": "V"
	}
}

Power Report

{
	"priority_level": 2,
	"timestamp": 1567677956,
	"report": {
		"value": 90,
		"unit": "W"
	}
}

Back